Construction Blog and Builder's Resource
Right wing upper root fairing clecoed in place for a test fitting.
Right wing lower root fairing fitting in progress.
Right wing upper root fairing stiffeners ready for riveting.
Right wing upper root fairing ready to screw down and go flying – in five or six months…
Right wing fuel tank vent line ready for test fitting.
Right wing fuel tank vent line in place. Looks good!
Right aileron clamped (gently!) to the alignment template.
Right aileron pushrods adjusted, lock nuts tightened, and ready for flight.
Pilot-side comm antenna installed.
Left wing back in the stand and right wing temporarily installed.
Left wing back in the stand and right wing temporarily installed.
Left wingtip nav light installed.
Left wingtip test fit again – this time to see if my screw countersinks fit the skin dimples. Success!
Wingtip rib installation underway.
Left wingtip ready to mount on the wing.
Left wingtip mounted for good (hopefully) and ready for flight.
Left wingtip mounted for good (hopefully) and ready for flight.
Battery, ground strap, and starter relay power cable installed.
