Right wing outboard bottom skin dimpled and ready for riveting.
Right wing inboard bottom skin dimpled and ready for riveting.
Right wing landing light mounted and wired.
Wings, skins underway
Category: Skins
Wings, skins, aileron component installation
Right wing aileron torque tube-to-bellcrank pushrod components primed.
Right wing aileron pushrods complete.
Right wing aileron bellcrank installed.
Right wing aileron torque tube fabricated and installed.
Right wing aileron torque tube-to-bellcrank pushrod adjusted and installed to aileron bellcrank.
Right wing aileron torque tube-to-bellcrank pushrod adjusted and installed to aileron torque tube.
Right wing aileron torque tube and pushrod connection closeup.
Right wing inboard bottom skin clecoed to wing. Root rib nutplate holes and access plate screw holes drilled.
Aileron trim servo components underway.
Wings, skins, fuel tank connections
Right wing fuel tank initial fitting.
Right wing fuel tank permanently attached.
Right wing wiring underway.
Right wing root wiring connectors – one for lighting, the other for the autopilot roll servo.
Right wing aileron trim connector.
Right wing autopilot roll servo wiring in progress.
Right wing lighting wiring in progress.
Wings, skins progress
Right wing outboard aileron hinge bracket mounted.
Right wing aileron gap fairing mounted.
Right wing leading edge clecoed on for riveting.
Right wing leading edge riveting in progress.
Right wing leading edge partially riveted.
Right wing leading edge fully riveted.
Right wing leading edge fully riveted.
