Construction Blog and Builder's Resource
Cover ribs getting some primer.
Forward center section side angles clecoed to forward center section bulkhead.
Forward center section side angles riveted to forward center section bulkhead.
Cover ribs bolted and riveted to forward center section bulkhead.
Clearance check of right wing aileron torque tube-to-bellcrank pushrod with aileron trim servo assembly installed.
Clearance check of right wing aileron torque tube-to-bellcrank pushrod with aileron trim servo assembly installed.
Right wing inboard inspection plate (with aileron trim servo assembly mounted) installed.
Overall view of right wing inboard inspection plate (with aileron trim servo assembly mounted) installed.
Right wing outboard bottom J-stiffener in place.
Right wing outboard bottom skin ready for riveting.
Right wing outboard bottom skin riveting in progress.
Right wing outboard aileron hinge bracket mounted.
Right wing aileron gap fairing mounted.
Right wing leading edge clecoed on for riveting.
Right wing leading edge riveting in progress.
Right wing leading edge partially riveted.
Right wing leading edge fully riveted.
Right wing leading edge fully riveted.
Right wing rear spar clecoed in place for match drilling.
Right wing rear spar components being primed.
Right wing rear spar riveting underway.
Right wing rear spar riveting complete.
Right wing inboard top skins and wingwalk doublers clecoed in place.
Right wing inboard top skins and wingwalk doublers clecoed in place.
