Right-side aft fuselage side skin cover plate in place.
Left-side aft fuselage side skin cover plate in place.
One of the elevator bolts shown as an example of torque seal application. A bit blobby here, but effective.
Forward tunnel cover clecoed in place. I was sure that it would have to be cut down at the aft end to allow all of the wires/tubes/cables/et al. to clear, but it actually fit. Amazing!!
Inlet baffles mostly secured (3 of 4 screws each) in place. The outboard screws must be extra-length due to the flox thickness, so they’re on order.
