Spinner clecoed on prior to being screwed in place.
GTN 750 tray adjusted very slightly aft, now enabling full seating of all connectors and Comm 1 activation (no longer X’ed out)!!.
Both Comm radios have now been successfully tested for reception and transmission. Each was crystal clear.
Spinner screwed in place. If not for good, at least until painting – unless Vic wants it off for inspection, of course.
Hinge cover assembly seals in process…
Temporary N-numbers in process..
Temporary N-numbers (left-side)…
Temporary N-numbers in process…
Temporary N-numbers (right-side)…
Data plate in process…
Data plate riveted in place for good!
